Isotherm Imaging

Home / About

About Isotherm Imaging

A thermal and aerial imaging firm for buildings and sites, based in greater Boston and launching in January 2027.

Who does the work

Isotherm Imaging is run by Austin Nace. Austin came to thermography from a career in IT, where the job was turning complicated systems into clear, accurate records that other people could act on. That is what a good inspection report does.

Every job is scanned or flown, analyzed and written up by the same person, so the report reflects what was actually seen on site, and you always know who to call with a question.

How we work

  • Data, not repairs. We find and document problems. Repairs and sign-offs stay with your electrician, roofer or engineer.
  • Safety first. No work on energized equipment; panels are opened by a qualified electrician.
  • Reports you can act on. Every finding has a location, a rating and a recommended action.
  • Year over year. Equipment lists and image positions are kept so the next scan can be compared with the last.

Service area

Within about 70 miles of Boston, including:

  • Boston and the inner suburbs
  • MetroWest and Worcester
  • The North Shore and Merrimack Valley
  • The South Shore and South Coast
  • Providence and northern Rhode Island
  • Southern New Hampshire

Credentials and insurance

Isotherm Imaging is a new firm, so here is exactly where each credential stands. This table is updated as each one is completed.

Status as of November 2026
CredentialStatus
Level I Infrared Thermography certificationExpected January 2027
NFPA 70E electrical safety trainingExpected January 2027
OSHA 10-Hour Construction safety cardExpected December 2026
FAA Part 107 Remote Pilot CertificateExpected December 2026
General liability and professional (errors and omissions) insuranceIn place before the first job
Drone liability and hull insuranceIn place before the first drone job, spring 2027
Massachusetts limited liability companyExpected December 2026

Equipment

  • Handheld thermal camera. Radiometric, with a focusable lens and current calibration certificate. Higher-resolution cameras are brought in when a job calls for them.
  • Thermal drone. Radiometric 640 × 512 thermal sensor paired with a high-resolution visible camera, from spring 2027.
  • Analysis and reporting software. Every temperature in a report is measured from radiometric data, not estimated from colors.

Why the name

An isotherm is a line connecting points of equal temperature. On a thermal image, isotherms are what make a problem stand out: everything at the same temperature looks alike, and the component that runs hotter breaks the pattern.

Talk about your building or site

Questions about a scan, a trial job or working together are welcome.

Contact Isotherm Imaging